Making your own wood filler with sawdust is no exception. Discard extra wood filler as it will not keep.Īs with anything, there are always limitations.It does not take much sanding to remove any extra filler so use a fine grit sandpaper. Clean your hands (if not using gloves) and tools.This is where I find the putty knife to be invaluable. I find it easier to do this with my fingers. Work your wood filler into the cracks you want to fill.Continue to work the ‘dough’ until it behaves like a paste between your fingers.
Remember, you can always add more as your go. The glue should slowly soften the entire mixture. Add the wood glue to the wood dust while mixing with your fingers or putty knife.It will take some practice to determine how much your require, but a good starting point is usually around a palm sized amount. Steps: make your own wood filler with sawdust (wood dust) Mixing surface. Grab a scrap piece of wood to use as a surface to mix your wood filler with sawdust.Personally, I like getting my hands dirty! Or if you just want to keep your hands clean, grab a pair of tight fitting gloves. Latex or nitrile gloves. Some glues can contain additives that aren’t great for our skin.No need to go expensive- any putty knife will do. Putty knife. I like to use a putty knife somewhere around the 1-3″ range depending on the size of the project.However, if you can find white wood glue, you are going to get the best possible color match. Binding agent (Wood glue). Most wood glues have a slight yellowy/brown tint to them and they will work just fine.You probably sanded each your wood pieces during your project.
Not only is the wood dust extremely fine, it is almost always from the wood I am working with. I find the best place to collect wood dust is from my Bosch orbit sander. Sawdust contains larger particles that are often different sizes and too large to use in this case.